Industrial Heating Element Cartridge Heater for Mold Injection

• After-sales Service: Yes
• Warranty: 3 Month Warranty
• Type: Industrial Heating Element
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: CARH-18
• Certification: CE
• Structure: Horizontal Type
• Brand: Thermal International
• Pipe Diameter: 3-30mm. Customized
• Pipe Length: Customized.
• Available Voltage Range: 12-480V
• Power: Customized
• Wire Material: Silicone Rubber, Glassfiber, or Customzied
• Wire Length: 20-2000mm. Customized Length
• Sheath Material: Stainless Steel 304/316/321/Incoloy800/840 etc.
• Application: Industrial Mold Injection
• Feature: Non-Standard Custom-Made
• Unheated Zone: Standard in 5-10mm
• Transport Package: Polybag in Carton
• Specification: Tubular Heater
• Trademark: Thermal International
• Origin: Guangzhou, China
• HS Code: 8516800000
• Production Capacity: 20, 000PCS/Week
• Package Size: 40.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 18.000kg

Product Description

Product Description

1. Product introduction:

       The cartridge heater is a tubular electric heating element that adopts the traditional electric heating wires to heat up and raise the temperature in short time. It is mainly composed of electric heating wires of iron chromium aluminum alloy and nickel chromium alloy, a metal tube shell of stainless steel or copper tube, magnesium oxide powder filled in the tube with good insulation and heat conductivity, and sealing agents such as silica gel for sealing the two ends of the tube orifice.

2. Categories & Characteristics:

1. miniature single head cartridge heater: Dia. 3-5.9mm
2. standard single head cartridge heater: Dia. 6-25mm
3. large single head cartridge heater: Dia. 25-100mm
4. hollow single head cartridge heater: the hollow pipe of single-ended heater is used to rapidly heat the air.
5. square single head cartridge heater: this product is the most effective as a heating element in molds under special circumstances, and is used in some tapered mold holes.
6. flat single head cartridge heater: this product is the most effective as a heating element in molds under special circumstances, and is used in some tapered mold holes. And other equipment suppliers.

3. Technical parameters:
 

Item description	Cartridge heater for mold injection
Product formation	Heat resistant alloy tube; Nickel chrome resistance heating wire; Insulate magnesium oxide powder; Cold end elicit rods; High temperature connection silicone tube; High temperature insulation wires.
Sheath material	Stainless steel 304/316/321/Incoloy800/840 etc.
Pipe length	Customized
Wire material	Silicone Rubber, Glassfiber, or Customzied
Pipe diameter	3-30mm. Customized
Wire length	20-2000mm. Customized length
Available voltage range	12-480V
Power	Customized
Max. working temp.	800degrees

4. Product display:

General view:

Details analyses:










5. Range of applications:

· Injection moulding - Internal heating of nozzles
· Hot runner systems - Heating of manifolds
· Packaging industry - Heating of cutting bars
· Packaging industry - Heating of hot stamps
· Laboratories - Heating of analytical equipment
· Medical - Dialysis, Sterilization, Blood Analyzer, Blood/Fluid Warmer, Temperature Therapy
· Telecommunications - Deicing, Enclosure Heater
· Transportation - Oil/Block Heater, Aircraft, Coffee Pot Heaters
· Food Service - Steamers, Dish Washers,
· Industrial - Packaging Equipment, Hole Punches, Hot Stamp.


6. Workflow:




7. Certificate:

8. Order Instruction:

When ordering Cartridge Heaters, please specify the following information:
1.Type of Cartridge Heater, i.e. the terminal options.
2.Diameter of Cartridge Heater.
3.Overall length for a straight Cartridge Heaters.
4.Wattage & Voltage
5.Lead type (glass fibre/PTFE)& lead length.

9. Packaging & Delivery:

       For sample or trial order of small quantity, we shall advise the Express Delivery for the high-efficient shipment. And for bulk purchase, we generally apply to the sea transportation. Of course, that would depend on the customers' requirements. 



About Us:
 
       Thermal International has been engaged in the development, design, production and sales in one of the sales of industrial electric heating technology company, based on the customers' specific needs, aiming at providing the customized/tailored solution of design, committed to the electric heating and temperature measurement in the field of development, constantly pursuing for technological value-added products,promote industry technology progress, Thermal International brand products have been exported to South Africa, Turkey, South Korea, USA and some other mainstream cities. In addition, we Thermal International has also set our sales representatives in some of the major countries. 
       Thermal International people always attach great importance to quality controlling from the very beginning to the very end. Thermal International continuously strive to find ways to reducing the production costs, and passing the savings over to you.Superior quality, stylish designs, competitive price and perfect service won us honorable customers. Thermal International services generally including the regular and thorough inspections throughout the manufacturing process, eliminating the need to employ additional quality control inspectors.

Our advantages:

1. Easy installation.
2. Fast heat exchange rate.
3. Long transfer of heat radiation.
4. Excellent corrosion resistance.
5. Designed and built for safety.
6. Low cost with long service life and high efficiency

FAQ:

1. Are you a factory or a trading company?
A: We're an experienced factory with our exclussive Research & Development team. 
    Offering you the most professional service. 
2. Will you accept customized requirement?
A: Of course, customized service is surely acceptable. Welcome to send us your drawing and more detailed specification parameters. We can supply you the products as per your specific requirements. 
3. Could I get some sample?
A: Yes, generally, 1pc sample for free is available. But if you need more samples, we may need to charge you some cost. Besides, for certain products, it may need to open mold before sampling, then we shall need to have the mold fee before sample. 
4. What's the delivery time for sample?
A: Generally it shall take 5~7days. For certain products, we need to prepare the materials for it. That depends.
5. What do you generally do in regarding to the products' quality control? 
A: We always put much emphasis on products quality. That's the priority. We shall contact strict quality inspection towards the products before delivery. And we've obtained the VDE, CE, UL, ISO and so forth.