Environmentally Friendly Electric Water Heater Sewage Outlet Descaling Anode Magnesium Rod

Product Description

Product Description

Environmentally Friendly Electric Water Heater Sewage Outlet Descaling Anode Magnesium Rod

The Water Heater Parts Magnesium Rod, also known as the Anode Rod, is an important component in the storage electric water heater used to prevent corrosion of the metal tank and soften the water quality.

Working Principle:

The magnesium rod is primarily composed of magnesium. In a water heater, it comes into contact with water along with the metal inner tank (primarily composed of iron). Because magnesium is electrochemically more active than iron, according to the electrochemical corrosion protection principle of sacrificial anode protecting cathode, the magnesium rod, acting as the anode, preferentially reacts chemically with corrosive substances (such as chloride ions and oxygen ions) in the water, corroding itself and thus protecting the metal inner tank, which acts as the cathode, from corrosion.

Main Functions:
- Anti-corrosion: Absorbs oxygen ions and divalent ions in hot water, reducing dissolved oxygen in the water, slowing corrosion of the metal inside the water tank and extending the life of the water heater.
- Water Softening: Chemically reacts with calcium and magnesium ions in the water, binding them together to form insoluble precipitates, reducing water hardness and minimizing scale formation.

Specification

Product Name	Magnesium Rod
Material	Environmentally friendly magnesium alloy
Magnesium Rod Diameter	D12mm-20mm, customized.
Magnesium Rod Length	L140-300mm, customized.
Screw Diameter	M4, M6
Product Utility	- Anti-corrosion and stain resistance; - Protecting the inner liner and heating tube
Product Process	Extrusion
Product Advantages	- Direct and reliable anti-corrosion effect - No external energy required, low cost - Lightweight and easy to install - Highly safe and environmentally friendly
Scope of Applications	Storage Electric Water Heater; Solar Water Heater; Storage Water Tanks, etc.

Where to Install the Magnesium Rod

As shown in the figure,

unscrew the cover of the Sewage Outlet of the water heater in the figure above,

insert the magnesium rod into the water heater and tighten it.

Available Similar Models for reference. 

Model NO.	Screw Diameter	Mg Rod Diameter	Mg Rod Length	Nut	Suitable Water Heater Capacity
M6-14*140	6mm	14mm	140mm	NO	20-30L
M6-14*140	6mm	14mm	140mm	3/4"	20-30L
M6-14*180	6mm	14mm	180mm	NO	40-100L
M6-14*180	6mm	14mm	180mm	3/4"	40-100L
M6-16*140	6mm	16mm	140mm	NO	20-30L
M6-16*140	6mm	16mm	140mm	3/4"	20-30L
M6-16*160	6mm	16mm	160mm	NO	20-40L
M6-16*160	6mm	16mm	160mm	3/4"	20-40L
M6-16*180	6mm	16mm	180mm	NO	30-45L
M6-16*180	6mm	16mm	180mm	3/4"	30-45L
M6-16*200	6mm	16mm	200mm	NO	50-60L
M6-16*200	6mm	16mm	200mm	3/4"	50-60L
M6-16*230	6mm	16mm	230mm	NO	65-100L
M6-16*230	6mm	16mm	230mm	3/4"	65-100L
M6-16*250	6mm	16mm	250mm	NO	65-100L
M6-16*250	6mm	16mm	250mm	3/4"	65-100L
M6-20*200	6mm	20mm	200mm	NO	20-45L
M6-20*200	6mm	20mm	200mm	1"	20-45L
M6-20*250	6mm	20mm	250mm	NO	50-60L
M6-20*250	6mm	20mm	250mm	1"	50-60L
M6-20*300	6mm	20mm	300mm	NO	80-100L
M6-20*300	6mm	20mm	300mm	1"	80-100L
M4*12*180	4mm	12mm	180mm	NO	30-100L
M4*12*180	4mm	12mm	180mm	1/2"	30-100L

Cleverly utilize the principles of 
chemical original batteries to 
better protect the water heater from corrosion!

Magnesium rod is commonly known as magnesium anode, also known as anode magnesium block, used to prevent corrosion of metal inner vessels and soften the water quality of magnesium rods. In the water vapor, the metal inner vessels are made of Taisteel or manganese steel, and the cathode principle is sacrificed by the electrochemical corrosion protection of metals. The magnesium rod is used as anode and the metal inner vessel is used as a cathode. In this way, the primary cell is formed by a conductive water medium between the cathode and the anode. The anode of the battery is consumed by corrosion, while the internal conductor of the cathode is protected.

Product Pictures

Packaging & Shipping

Workshop Pictures

Certifications

FAQ

FAQ

Q1 Are you trader? 
A1 We are factory.
 
Q2 What's your lead time for 5000pcs?
A2 We need around 20days after down payment received. .
 
Q3 You payment term?
A3 We accept LC, T/T 20% remittance +80% before delivery, DP.
 
Q4 Can we print our LOGO on heating element?
A4 Yes.
 
Q5 Do you offer guarantee? 
A5 Yes. We offer 1 year guarantee.