Nozzle band heaters
Nozzle band heaters are available in mica, ceramic, micro tubular and sealed type. Nozzle band heaters with inbuilt thermocouple are also available. We suggest micro tubular nozzle heater with inner brass bushing and outer SS strap for high temperature applications.
A. Mica Nozzle Band Heaters
Sheath material brass.
Fiberglass or PTFE material insulated SS mixed wire terminals.
B. Plastic proof Nozzle Band Heaters
Plastic proof.
Sheathing material high grade steel or brass.
Metal braided Fiberglas wire terminals.
C. Leaf proof Nozzle Band Heaters
Plastic proof.
Sheathing material high grade steel.
Insulation - high grade mineral insulation.
Metal braided fiberglass wire terminals.
Product features
Good thermal conductivity: high-quality high-temperature heating wire, with fast heat dissipation, uniform heat dissipation and high temperature resistance.
Good insulation performance: high-quality high-temperature resistant mica board is adopted, which has high temperature resistance and good insulation performance.
Convenient installation: it is fastened by hexagon socket bolts, which is firm and reliable and easy to install.
Long service life: fully enclosed as a whole, effectively preventing the injection nozzle of injection molding machine from leaking glue and causing burning.
Power, voltage, size and product shape can be customized as required.
Characteristics & Advantages
Order Instructions:
The inner diameter of band heater is very important. Even a small error in diameter will bring trouble to installation, so the following parameters are required to be provided accurately when ordering:
1. Diameter (ring type: inner diameter mm or outer diameter mm when internal application is required; Square: length mm);
2. Width (mm);
3. Lead form, length and position;
4. Voltage & Power;
5. Single piece or double piece;
6. Location and size of thermocouple hole or notch;
7. Special gap width;
8. Ordered quantity.
Item description |
Brass Band Heater
Thermal International Brass Band Heaters are designed for injection moulding and plastic extruders as well as other similar types of machinery. They are made from brass and have a smooth contact area without voids which gives them excellent thermal exchange. The flexible leads which are resistant to being pulled off leave the heater at a 45º angle. |
Features |
- Excellent Material
- Soild & Reliable
- High Temperature Resistance
- Long Service Life
- High Temperature Protection Wire |
Ambient temperature |
-20~+80ºC |
Electrical strength |
1500V/50Hz sinusoidal withstand test, no breakdown no flashover. |
Leakage current |
<5mA |
Cold insulation resistance |
>50MΩ |
Grounding resistance |
<5Ω |
Input power |
Can be customized as per customers' specific requirements. (power deviation +5%~-10%) |
General applications |
- Plastic Injection Molding Machines
- Plastic Extruders
- Oil Reclamation Equipment
- Food and Candy Extruders
- Drum Heating
- Extrusion Dies
- Holding Tanks
- Blow Molding Machines
- Vending Machines
- Food Service Warming
- Autoclaves & Sterilizers
- Metallurgical Analyzers
- Fluidized Bed |
Order instructions |
The inner diameter of band heater is very important. Even a small error in diameter will bring trouble to installation, so the following parameters are required to be provided accurately when ordering:
1. Diameter (ring type: inner diameter mm or outer diameter mm when internal application is required; Square: length mm);
2. Width (mm);
3. Lead form, length and position;
4. Voltage & Power;
5. Single piece or double piece;
6. Location and size of thermocouple hole or notch;
7. Special gap width;
8. Ordered quantity. |







ACCESSORIES FOR BAND HEATER:




Thermal International is specialized in the production and processing of electric heating products and other spare parts, is equipped with a complete and scientific quality management system. Thermal International is recogonized by its integrity, strength and quality of products. Welcome friends from all walks of life to negotiate business. Thermal International has been focusing on the cultivation and introduction of talents for many years, and has a large number of high-quality engineering and technical personnel, therefore the company's products are high in science and technology content, which updates fast and enjoys a broad market.
Over the past ten years since its establishment, the company has accumulated rich experience in design and manufacture, with a number of outstanding scientific research personnel, advanced manufacturing and processing equipment, perfect testing system and complete after-sales service system. Our products of various specifications have been widely used in electrical, electronic, pharmaceutical, chemical and metallurgical fields, and have been trusted by users all over the world.
Products in the peer are leading, and establish a good corporate reputation, the company in line with professional quality, Excellence business philosophy, to provide customers with first-class products, first-class service. We are hoping to communicate with customers from all walks of life, seeking win-win development opportunity, and creating a brighter tomorrow!
Product categories involved:
* Thermostat (Including KSD/KST/JPC/Capillary thermostat)
* Heating Element (both for domestic appliance and industrial use)
* Mechanical timer (mainly for kitchen appliance)
* Switch (Including the Micro/Rotary/Position Switch)
* Indicated lamp (Neon Lamp)
* Motor
FAQ:
1.Are you a factory or a trading company?
A: We're an experienced factory with our exclussive Research & Development team. Offering you the most professional service.
2.Will you accept customized requirement?
A: Of course, customized service is surely acceptable. Welcome to send us your drawing andmore detailed specification parameters. We can supply you the products as per your specificrequirements.
3.Could l get some sample?
A: Yes, generally,1pc sample for free is available. But if you need more samples, we mayneed to charge you some cost. Besides, for certain products, it may need to open moldbefore sampling, then we shall need to have the mold fee before sample.
4. What's the delivery time for sample?
A: Generally it shall take 5~7days. For certain products, we need to prepare the materials for it. That depends.
5. What do you generally do in regarding to the products' quality control?
A: We always put much emphasis on products quality. That's the priority. We shall contactstrict quality inspection towards the products before delivery. And we've obtained the VDE,CE, UL, ISO and so forth.