Factory Supply Injection Machine Parts Stable Performance Brass Band Heater

• Customization: Available
• After-sales Service: Yes
• Type: Industrial Heating Element
• Model NO.: BAND-54
• Certification: CE
• Structure: Brass Sealed Nozzle Heater
• Brand: Thermal International
• Material: Brass
• Industrial Application: Extruder, Injection Molding etc.
• Voltage: 12-440V, Can Be Customized.
• Heating Wire: Nicr 80/20 Wire
• Power Density: Max. 5W/Cm²
• Insulation: Mica
• Operating Temperature: Max.800ºC
• Transport Package: Plastic Bag+Carton/Wooden Case
• Specification: Customized Size
• Trademark: Thermal International
• Origin: Guangzhou, China
• HS Code: 8516800000
• Production Capacity: 20, 000PCS/Week
• Package Size: 35.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 9.000kg

Product Description

Product Description

Characteristics of ceramic band heater:
1. quick heat transfer, uniform heat and stable work.
2. constant temperature without any leakage, can save the electric energy, the outer cover with hand touch is OK and not hot, works safely. .
3. high power when it works, and the power of ceramic strip is 0.5~1.5 times higher than normal.
4, adopting the high-temperature heat wire, with heat faster, even heating, high temperature stability and other characteristics, can be used for a long time in the 600-800 ºC.
5.long life time, for the raw material is aged slowly at high temperature.
6.complies with national GB technical requirements. Power deviation ∽ + 5% to 5%.
7. Electric strength: the voltage 1500v/50Hz sine ac voltage test was tested, for 1minute, without any breakdown.

 

Characteristics & Advantages

Main features:
1, adopt high-temperature resistant mica board, which has advanced characteristics of high-temperature resistance and good insulation performance.
2. High-temperature resistant heating wire is adopted, which has the characteristics of fast heat dissipation, uniform heating and high temperature resistance.
3, the use of high-quality copper material has the characteristics of fast heat conduction, fast heat dissipation, high temperature resistance, and the temperature can reach 400ºC without burning.
4. The fully sealed production has special effect on the injection nozzle of injection molding machine with serious glue leakage.
5. Long service life, saving replacement times and improving work efficiency.
6. Technical parameters: the power can reach 4W/ cm2, and the customized voltage is between 110-440V V..
7, the leakage current is less than 0.5MA.
NOTES:
1) Brass electric heating coil should be used at the specified voltage. In some areas, the voltage changes greatly day and night, so it is recommended to use transformers to avoid affecting the service life of products.
2) The standard outlet length is 300mm.
 

Product Parameters

 

Item description	Brass Band Heater Thermal International Brass Band Heaters are designed for injection moulding and plastic extruders as well as other similar types of machinery. They are made from brass and have a smooth contact area without voids which gives them excellent thermal exchange. The flexible leads which are resistant to being pulled off leave the heater at a 45º angle.
Features	- Excellent Material - Soild & Reliable - High Temperature Resistance - Long Service Life - High Temperature Protection Wire
Ambient temperature	-20~+80ºC
Electrical strength	1500V/50Hz sinusoidal withstand test, no breakdown no flashover.
Leakage current	<5mA
Cold insulation resistance	>50MΩ
Grounding resistance	<5Ω
Input power	Can be customized as per customers' specific requirements. (power deviation +5%~-10%)
General applications	- Plastic Injection Molding Machines - Plastic Extruders - Oil Reclamation Equipment - Food and Candy Extruders - Drum Heating - Extrusion Dies - Holding Tanks - Blow Molding Machines - Vending Machines - Food Service Warming - Autoclaves & Sterilizers - Metallurgical Analyzers - Fluidized Bed
Order instructions	The inner diameter of band heater is very important. Even a small error in diameter will bring trouble to installation, so the following parameters are required to be provided accurately when ordering: 1. Diameter (ring type: inner diameter mm or outer diameter mm when internal application is required; Square: length mm); 2. Width (mm); 3. Lead form, length and position; 4. Voltage & Power; 5. Single piece or double piece; 6. Location and size of thermocouple hole or notch; 7. Special gap width; 8. Ordered quantity.

 

Detailed Photos

ACCESSORIES FOR BAND HEATER:

Application

 

Working Process

 

Packaging & Shipping

About Us

Thermal International is specialized in the production and processing of electric heating products and other spare parts, is equipped with a complete and scientific quality management system. Thermal International is recogonized by its integrity, strength and quality of products. Welcome friends from all walks of life to negotiate business. Thermal International has been focusing on the cultivation and introduction of talents for many years, and has a large number of high-quality engineering and technical personnel, therefore the company's products are high in science and technology content, which updates fast and enjoys a broad market. 
Over the past ten years since its establishment, the company has accumulated rich experience in design and manufacture, with a number of outstanding scientific research personnel, advanced manufacturing and processing equipment, perfect testing system and complete after-sales service system. Our products of various specifications have been widely used in electrical, electronic, pharmaceutical, chemical and metallurgical fields, and have been trusted by users all over the world. 
Products in the peer are leading, and establish a good corporate reputation, the company in line with professional quality, Excellence business philosophy, to provide customers with first-class products, first-class service. We are hoping to communicate with customers from all walks of life, seeking win-win development opportunity, and creating a brighter tomorrow!        



Product categories involved:
* Thermostat (Including KSD/KST/JPC/Capillary thermostat)
* Heating Element (both for domestic appliance and industrial use)
* Mechanical timer (mainly for kitchen appliance)
* Switch (Including the Micro/Rotary/Position Switch)
* Indicated lamp (Neon Lamp)
* Motor



FAQ:
1.Are you a factory or a trading company?
A: We're an experienced factory with our exclussive Research & Development team. Offering you the most professional service.
2.Will you accept customized requirement?
A: Of course, customized service is surely acceptable. Welcome to send us your drawing andmore detailed specification parameters. We can supply you the products as per your specificrequirements.
3.Could l get some sample?
A: Yes, generally,1pc sample for free is available. But if you need more samples, we mayneed to charge you some cost. Besides, for certain products, it may need to open moldbefore sampling, then we shall need to have the mold fee before sample.
4. What's the delivery time for sample?
A: Generally it shall take 5~7days. For certain products, we need to prepare the materials for it. That depends.
5. What do you generally do in regarding to the products' quality control?
A: We always put much emphasis on products quality. That's the priority. We shall contactstrict quality inspection towards the products before delivery. And we've obtained the VDE,CE, UL, ISO and so forth.